Original Factory Amorphous Ribbon Iron Based Amorphous Alloy - Nanocrystalline Cores for Power Transformer (LLE-PC) – LLE
Original Factory Amorphous Ribbon Iron Based Amorphous Alloy - Nanocrystalline Cores for Power Transformer (LLE-PC) – LLE Detail:
Naocrystalline Cores for Power Transformer(LLE-PC)
- High permeability
- High saturation Induction ,Low core loss
- The density and lamination coefficient of nano-crystalline is lower than that of
- Permalloy, under the condition of the same size and similar performance of the
- two. It is 1/4 lighter in weight, and 1/3 lower in the manufacturing cost.
- Good temperature stability:work for a long time at temperature of -55 ~ 130 ℃
- The linear range of nano-crystalline alloy is wider than that of Permalloy .
2. Properties:
Comparison of different materials:
Property | Nanocrystalline cores | permalloy cores | Si-steel cores |
Saturate induction (Bs) | 1.25T | 0.75T | 2.03T |
Initial permeability((µ0) | 8~12×104 | 5~8×104 | 103 |
Maximum permeability(µm) | 60×104 | 60×104 | 4×104 |
Curie temperature(℃) | 570 | 400 | 740 |
Density(g/cm3) | 7.25 | 8.75 | 7.65 |
Stacking factor | 0.7 | 0.9 | 0.95 |
Thickness (mm) | 0.03 | 0.15 | 0.3 |
3 .Specifications and electric parameters:
No. |
Core Size IDxODxHT |
Case size IDxODxHT |
1 |
90×125×25 |
85x130x30 |
2 |
100x150x25 |
95x155x30 |
3 |
110x150x15 |
105x155x20 |
4 |
305×490×15 |
299×496×23 |
5 |
315×395×35 |
309×401×43 |
6 |
198×248×30 |
192×254×37 |
7 |
198×248×20 |
192×254×27 |
8 |
155×200×30 |
150×205×36 |
9 |
140×180×30 |
135×185×36 |
10 |
130×190×30 |
125×195×36 |
11 |
305×490×15 |
299×496×23 |
12 |
315×395×35 |
309×401×43 |
13 |
198×248×30 |
192×254×37 |
14 |
198×248×20 |
192×254×27 |
15 |
155×200×30 |
150×205×36 |
16 |
140×180×30 |
135×185×36 |
17 |
130×190×30 |
125×195×36 |
18 |
75*95/105*125×25 |
70*90/110*130×30 |
19 |
80*95/120*135×25 |
75*90/125*140×30 |
20 |
90*90/160*160×30 |
85*85/165*165×36 |
Remark:
- 1)To the specification in the form, cores can be made for meeting user’s need.
- 2) The maximal OD size we can make is 1200mm.
- 3) case material: plastic case, stainless steel, aluminum
Product detail pictures:
Related Product Guide:
Asymmetry in Time Evolution of Magnetization in Magnetic Nanostructures | Amorphous Ribbon For Transformer Core
Splitting of standing spin-wave modes in circular submicron ferromagnetic dot under axial symmetry violation | Current Transformer Core
We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for Original Factory Amorphous Ribbon Iron Based Amorphous Alloy - Nanocrystalline Cores for Power Transformer (LLE-PC) – LLE, The product will supply to all over the world, such as: London, Korea, Manchester, We are looking forward to cooperating closely with you to our mutual benefits and top development. We guaranteed quality, if customers were not satisfied with the products' quality, you can return within 7days with their original states.
By Michelle from Karachi - 2018.11.11 19:52
Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!
By Amelia from Nepal - 2017.09.16 13:44